Cylinders Series 40
- Camozzi
- Movement
- Cylinders according standards
- Cylinders Series 40
Download PDF (2.129,6 Kb
Double acting, cushioned, magnetic ø160 - 200 - 250 (DIN/ISO 6431)
Series general data
| Type of construction |
with tie-rods |
| Operation |
double-acting |
| Materials |
end-blocks = aluminium - other parts: see coding |
| Mounting |
with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination |
| Strokes min - max |
10 ÷ 2500 mm |
| Operating temperature |
0°C ÷ 80°C (with dry air - 20°C) |
| Operating pressure |
1 ÷ 10 bar |
| Speed |
10 ÷ 500 mm/sec (without load) |
| Fluid |
filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Code
40
|
SERIES
|
M
|
VERSION:
M = standard, magnetic
|
2
|
OPERATION:
2 = double-acting (front and rear cushions)
3 = double-acting (no cushion)
4 = double-acting (rear cushions)
5 = double-acting (front cushion)
6 = double-acting (through-rod with front and rear cushions)
|
L
|
MATERIALS:
L= rolled stainless steel rod AISI 420B anodized AL round tube NBR seals nuts and tie-rods zinc-plated steel
T = rolled stainless steel rod AISI 420B anodized AL round tube nuts stainless steel AISI 303 tie-rods stainless steel AISI 420B NBR seals.
Note: bore 250 mm cylinders rod = C40 chrome plated steel.
|
160
|
BORE:
160 = 160 mm
200 = 200 mm
250 = 250 mm
|
A
|
TYPE OF BRACKET:
A = standard
F = cylinder with centre trunnion
|
0200
|
STROKE
see table
|
| |
= standard
V = rod seals in FKM
|
