PWM control device, with current control system for directly operated proportional vavles
General Data :
| Material of container | Polycarbonate |
| Electrical connections | Screw |
| Environmental temperature | 0 ÷ 50°C |
| Mounting | in any position |
| Power supply | 6 V ÷ 24 V DC (± 10%) |
| Consumption | 0.4 W (without valve) |
| Analogical input | 0 ÷ 10 V 4 ÷ 20 mA |
| Input impedance | >30 Kohm with inlet under voltage <200 ohm with inlet under current |
| Output PWM | 120 Hz ÷ 11.7 KHz (fixed, according to the valve chosen) |
| Maximum current (valve) | 1 A |
| Protection | Polarity inversion, short circuit of the outlet |
| External diameter of cable jacket | 5 ÷ 7.5 mm with seal only 4 ÷ 6 mm with reducer and seal |
| Conductor section | 26 ÷ 16 AWG / 0,13 ÷ 1,5 mm2 |
| Maximum length supply/signal cable | 10 m |
| Maximum length valve cable | 5 m |
| IP protection class according to EN 60529 | IP 54 |
| Remp function | Adjustable time from 0 to 5 s |
| Regulation min. current (Offset) | 0% ÷ 40% F.S. |
| Regulation maximum current | 50% ÷ 100% F.S. |
| 130 | SERIES |
| 2 | VOLTAGE: 2 = 24 V DC (max power 24 W) 3 = 12 V DC (max power 12 W) 4 = 6 V DC (max power 6 W) 5 = 11 V DC (max power 11 W) |
| 2 | POWER: 1 = 3 W 2 = 6.5 W 3 = 3.2 W 4 = 4.3 W 5 = 10 W |
| 2 | PWM FREQUENCY: 2 = 500 Hz 3 = 1 KHz |